Section 301 – Request for Comments on $300 Billion Exclusions Expiring September 1, 2020 New List 4 Exclusions and Modifications to HTS Subheadings

July 23, 2020

1. Request for Comments
2. 7th list of $300 Exclusions (List 4)
3. Modifications to HTS Subheadings
4. Exclusion List Updated as of July 22, 2020

1. Request for Comments $300 Billion (List 4)

On July 17, 2020 the USTR (85 FR 43639) requested comments on the extension of exclusions granted under List 4 ($300 billion action), which became effective September 1, 2019 and are set to expire September 1, 2020.

This request for comments covers the 6th and 7th (see below) exclusions under List 4. The sixth notice of exclusions was published in 85 FR 41658 of 07/10/2020. 

To submit comments, visit the public docket at https://comments.USTR.gov between July 15 and August 14, 2020 to submit comments for an exclusion extension under (USTR-2020-0027).

As noted in our June 25, 2020 newsletter, the period to submit comments to extend the first five $300 Billion List 4 exclusions is set to expire on July 30, 2020 as follows: 85 FR 13970 (March 10, 2020); 85 FR 15244 (March 17, 2020); 85 FR 17936 (March 31, 2020); 85 FR 28693 (May 13, 2020); 85 FR 35975 (June 12, 2020). Comments must be submitted by July 30, 2020 11:59 pm ET at https://comments.USTR.gov.

The USTR is considering a possible extension of up to 12 months for these exclusions.

2. 7th List of $300 Billion Exclusions

On July 21, 2020 the USTR pre-published the 7th list of exclusions involving 11 subheadings and 53 subheadings. These exclusions are valid from September 1, 2019 through midnight on September 1, 2020. Comments to extend these exclusions must be filed by August 14, 2020.

Brokers, importers and filers are instructed to use Chapter 99 designation 9903.88.53 upon entry.

HTS

Heading/ Subheading 

Description

0505.10.0055

Subheading

Skins and other parts of birds, with their feathers or down, feathers and parts of feathers (whether or not with trimmed edges) and down, not further worked than cleaned, disinfected or treated for preservation; powder and waste of feathers or parts of feathers: down

3913.10.0000

Product Specific

Sodium alginate resins (CAS No. 9005-38-3) (described in statistical reporting number 3913.10.0000)

3924.90.5650

Product Specific

Boot hangers of plastics and steel, each designed to hold one pair of boots, presented with couplers of plastics to link two or more boot hangers vertically (described in statistical reporting number 3924.90.5650)

3925.20.0010

Product Specific

Exterior doors having outer faces of plastics with foamed plastics insulation between those faces, each measuring at least 213 cm but not more than 245 cm in height, at least 80 cm but not more than 95 cm in width and not more than 45 mm in thickness (described in statistical reporting number 3925.20.0010)

3926.90.9990;
3926.90.9985

Product Specific

Clamps and clips of molded plastics, each with a fastener or adhesive backing for affixing a cord or cable to a flat surface (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)

3926.90.9990;
3926.90.9985

Product Specific

Molded shells of plastics, each measuring at least 11.1 cm but not more than 11.7 cm in length and at least 7.9 cm but not more than 8.6 cm in width, weighing at least 38 g but not more than 42 g, having two drilled holes (one near the midpoint of each long side and in horizontal alignment with each other), of a kind used to form a housing for an earphone (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)

3926.90.9990;
3926.90.9985

Product Specific

Sets of three polyvinyl chloride-coated foam pads, of plastics, of a kind used to assemble flotation work vests by passing adjustable straps with buckles through slots in the pads, each set comprising two irregularly shaped front/side pads and one rectangular back pad (described in statistical reporting number 3926.90.9990 prior to July 1, 2020; described in statistical reporting number 3926.90.9985 effective July 1, 2020)

5504.10.0000

Subheading

Artificial staple fibers, not carded, combed or otherwise processed for spinning, of viscose rayon

6108.91.0030

Product Specific

Women's knit robes in chief weight of cotton, with hook and loop tab closure (described in statistical reporting number 6108.91.0030)

6111.20.6070

Product Specific

Babies' gowns of cotton knitted interlock fabric, each with sleeves, neck opening and elasticized bottom opening (described in statistical reporting number 6111.20.6070)

6111.20.6070

Product Specific

Babies' sleep sacks, knitted, of cotton, each with neck opening and two-way zipper (described in statistical reporting number 6111.20.6070)

6111.20.6070

Product Specific

Babies' sleep sacks of cotton interlock knitted fabric, sleeveless, each with neck opening and two-way zipper (described in statistical reporting number 6111.20.6070)

6111.20.6070

Product Specific

Babies' swaddle sacks of cotton knitted interlock fabric, each with sleeves and mitten cuffs (described in statistical reporting number 6111.20.6070)

6111.30.5015

Product Specific

Babies' blanket sleepers of polyester knitted fleece, sleeveless, each with two-way zipper (described in statistical reporting number 6111.30.5015)

6207.91.1000

Product Specific

Men's and boys' cotton terry bathrobes with muslin trim, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6207.91.1000)

6208.91.1010

Product Specific

Women's cotton terry bathrobes with muslin trim, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6208.91.1010)

6208.91.1020

Product Specific

Girls' cotton terry bathrobes with muslin trim, each beltless but featuring a hook- and-loop tab (described in statistical reporting number 6208.91.1020)

6208.92.0020

Product Specific

Girls' fleece bathrobes, each beltless but featuring a hook-and-loop tab (described in statistical reporting number 6208.92.0020)

6301.30.0010

Product Specific

Blankets (other than electric blankets) of cotton, woven, each measuring at least 116 cm but not more than 118 cm on an edge (described in statistical reporting number 6301.30.0010)

6301.30.0020

Product Specific

Blankets (other than electric blankets) of cotton, other than woven, each measuring at least 116 cm but not more than 118 cm on an edge (described in statistical reporting number 6301.30.0020)

6302.31.9020

Product Specific

Crib sheets of muslin cotton, fitted with elastic (described in statistical reporting number 6302.31.9020)

6302.31.9040

Product Specific

Protective covers of cotton for pillows, not knitted or crocheted, of cotton, not napped or printed, each with full encasement construction and zipper opening (described in statistical reporting number 6302.31.9040)

6304.92.0000

Product Specific

Oven mitts, not knitted or crocheted, of cotton, each incorporating a hanging loop, measuring at least 16 cm but not more than 19 cm in width by at least 29 cm but not more than 32 cm in length (described in statistical reporting number 6304.92.0000)

6307.90.9889;
6307.90.9891

Product Specific

Handrail covers for spas and pools, the foregoing composed of 95 percent polyester and 5 percent spandex by weight, each measuring at least 60 cm but not more than 306 cm in length (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

6307.90.9889;
6307.90.9891

Product Specific

Outdoor shelters, each comprising a canopy of textiles, a folding frame and a carrying case with wheels (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

6506.10.6045

Product Specific

Athletic, recreational and sporting headgear (other than of reinforced or laminated plastics), each with an inner protective suspension system and a sun visor, each weighing not more than 500 g and designed for off-road use with bicycles (described in statistical reporting number 6506.10.6045)

6506.10.6075

Product Specific

Folding helmets of injected plastic parts, each measuring not more than 85 mm in thickness when folded, weighing not more than 525 g (described in statistical reporting number 6506.10.6075)

8215.99.3500

Subheading

Base metal spoons, w/stainless steel handles & valued at 25 cents and over, and base metal ladles w/stainless steel handles

8302.42.3065

Product Specific

Fittings of galvanized steel, including but not limited to support frames, wings, legs, connector and sign supports, all of which are parts of retail display fixtures (described in statistical reporting number 8302.42.3065)

8430.20.0060

Product Specific

Electric snowblowers, corded or cordless, each weighing not more than 46 kg, with a motor not more than 15 A, wheeled (described in statistical reporting number 8430.20.0060)

8443.91.3000

Product Specific

Cylindrical steel drives specially designed for adjusting color on machines that print on corrugated paper and paperboard, each article measuring at least 8 mm but not more than 9 mm in diameter and at least 2.5 mm but not more than 3 mm in length, and each article weighing at least 12 kg but not more than 14.1 kg (described in statistical reporting number 8443.91.3000)

8443.91.3000

Product Specific

Cylindrical steel drives specially designed to control color registration (alignment) and material tension on printing machinery, each drive measuring at least 155 mm but not more than 160 mm in diameter and at least 165 mm but not more than 170 mm in length, weighing at least 3 kg but not more than 4 kg (described in statistical reporting number 8443.91.3000)

8447.90.5000

Product Specific

Electrical automated embroidery machines capable of being programmed by an operator at a machine control console and also capable of saving or loading digital programming commands through a USB port or a local area network connection, each machine having at least two but not more than eight parallel-operating multi- thread embroidery heads and a single liquid-crystal display (“LCD”) panel with a video display diagonal measuring at least 160 mm but not more than 170 mm and associated control panel (described in statistical reporting number 8447.90.5000)

8481.90.3000

Product Specific

Cast iron covers for hand-operated gate valves (described in statistical reporting number 8481.90.3000)

8481.90.3000

Product Specific

Iron or steel bodies of hand-operated disc (or disk) valves (described in statistical reporting number 8481.90.3000)

8481.90.3000

Product Specific

Steel parts of hand-operated gate valves (described in statistical reporting number 8481.90.3000)

8507.60.0020

Product Specific

Lithium-ion batteries consisting of cases of base metal containing 18650 individual lithium-ion battery cells, such batteries having a total capacity of at least 60 but not more than 200 watt hours, with at least one USB Type-C port, at least one USB Type-A port, at least one wireless charging pad and a digital screen that displays the power conditions of the battery (described in statistical reporting number 8507.60.0020)

8507.60.0020

Product Specific

Lithium-ion batteries consisting of cases of base metal containing 18650 individual lithium-ion battery cells, such batteries having a total capacity of at least at least 90 but not more than 6,500 watt hours, with at least one AC outlet, at least one USB port, at least one female barrel port and a digital screen that displays the power conditions of the battery (described in statistical reporting number 8507.60.0020)

8516.71.0020

Product Specific

Electric coffee makers of a kind used for domestic purposes, DC powered via a USB cable, each weighing not more than 0.5 kg (described in statistical reporting number 8516.71.0020)

8518.22.0000

Product Specific

Wireless communication apparatus that can receive audio data to be distributed to wireless speakers (described in statistical reporting number 8518.22.0000)

8539.29.3050

Product Specific

Fuse-type incandescent tungsten-filament lamps, designed for a voltage of 12 V or more but not exceeding 14 V, each measuring not more than 7 mm in diameter and not more than 32 mm in length (described in statistical reporting number 8539.29.3050)

8714.10.0050

Product Specific

Headlight brackets of aluminum, for motorcycles, each measuring not more than 34 cm by 29 cm by 19 cm, weighing not more than 2 kg (described in statistical reporting number 8714.10.0050)

9207.90.0040

Product Specific

Electric guitar kits, each consisting of all of the parts necessary to construct an electric guitar (described in statistical reporting number 9207.90.0040)

9209.94.8000

Product Specific

Parts of music synthesizers of heading 9207, comprising specially designed printed circuit assemblies for affecting the characteristics or qualities of sound (described in statistical reporting number 9209.94.8000)

9304.00.2000

Product Specific

Pre-charged pneumatic ("PCP") air rifles, each measuring at least 101 cm but not more than 115 cm in length, weighing at least 2.8 kg but not more than 3.5 kg (described in statistical reporting number 9304.00.2000)

9506.29.0080

Product Specific

Modular diving boards, suitable for mounting on boats or docks (described in statistical reporting number 9506.29.0080)

9506.29.0080

Product Specific

Swim masks, snorkeling masks, snorkels and water fins (described in statistical reporting number 9506.29.0080)

9506.70.4000

Subheading

Ice skates w/footwear permanently attached

9506.91.0030

Product Specific

Balance trainers of plastics, each measuring not more than 120 cm in length by 45 cm in width by 27 cm in height, containing an air bladder (described in statistical reporting number 9506.91.0030)

9506.91.0030

Product Specific

Exercise machines of steel, each measuring at least 157 cm but not more than 158 cm in length, at least 152 cm but not more than 153 cm in width and at least 88 cm but not more than 90 cm in height, of a kind specifically designed to train the gluteal muscles (described in statistical reporting number 9506.91.0030)

9506.91.0030

Product Specific

Push-up exercise machines, each consisting of an aluminum extrusion with hard plastic end-caps, a hard plastic center divider, two sliding handles of hard plastics and rubber and a sliding adjustment plate (described in statistical reporting number 9506.91.0030)

9603.90.8050

Product Specific

Brushes of natural goat hair bristles, which are in lengths of at least 30 mm but not more than 33 mm, enclosed in a plastic protective holder, for cleaning optical lenses (described in statistical reporting number 9603.90.8050)

9608.20.0000

Product Specific

Porous-tipped markers for applying liquid chalk (described in statistical reporting number 9608.20.0000)

9701.10.0000

Subheading

Paintings, drawings (o/than of 4906) and pastels, executed entirely by hand, whether or not framed

9702.00.0000

Subheading

Original engravings, prints and lithographs, whether or not framed

9703.00.0000

Subheading

Original sculptures and statuary, in any material

9705.00.0010

Product Specific

Gold coins of numismatic (collector’s) interest, 250 years or more in age, of Chinese origin (described in statistical reporting number 9705.00.0010)

9705.00.0040

Product Specific

Numismatic (collector's) coins (other than archaeological pieces and other than of gold), 250 years or more in age (described in statistical reporting number 9705.00.0040)

9705.00.0050

Product Specific

Gold coins of numismatic (collector’s) interest, less than 250 years in age, of Chinese origin (described in statistical reporting number 9705.00.0050)

9705.00.0065

Product Specific

Coins of Chinese origin and of numismatic (collector’s) interest, of any metal other than of gold, less than 250 years in age (described in statistical reporting number 9705.00.0065)

9705.00.0085

Subheading

Collections and collectors' pieces of zoological, botanical, mineralogical, anatomical, historical, archaeological etc. interest

9706.00.0020

Subheading

Antiques of an age exceeding one hundred years, silverware

9706.00.0040

Subheading

Antiques of an age exceeding one hundred years, furniture

9706.00.0060

Subheading

Antiques of an age exceeding one hundred years, other

3. Modifications to HTS Subheadings

Three modifications to HTS Subheadings have been published. The below list has the modifications along with the appropriate Federal Register notice.

Applicable
List

HTS Subheading

Original text

Modified text (underlined)

Federal Register

3

4202.92.3120

Backpacks of 66.66 tex polyester, without hydration systems, each measuring not more than 57 cm by 44 cm by 11 cm (described in statistical reporting number 4202.92.3120)

Backpacks of 66.66 tex polyester, each measuring not more than 57 cm by 44 cm by 11 cm (described in statistical reporting number 4202.92.3120)

85 FR 42968 of 07/15/2020

4

6307.90.9889; 6307.90.9891

Comforter shells of fabric in chief weight of polyester, each measuring at least 171 cm but not more than 202 cm in width and at least 227 cm but not more than 230 cm in length, weighing not more than 90 g/m2, with an opening on one side (described in statistical reporting number 6307.90.9889)

Comforter shells of fabric in chief weight of polyester, each measuring at least 171 cm but not more than 202 cm in width and at least 227 cm but not more than 230 cm in length, weighing not more than 90 g/m2, with an opening on one side (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number number 6307.90.9891 effective July 1, 2020)

To be published 7/23/2020

4

6307.90.9889; 6307.90.9891

Fabric shells for backrests in chief weight of polyester fabric (described in statistical reporting number 6307.90.9889)

Fabric shells for backrests in chief weight of polyester fabric (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

To be published 7/23/2020

4

6307.90.9889; 6307.90.9891

Fabric shells for cushions in chief weight of polyester fiber, designed for use with seats of heading 9401 (other than seats for aircraft or motor vehicles) (described in statistical reporting number 6307.90.9889)

Fabric shells for cushions in chief weight of polyester fiber, designed for use with seats of heading 9401 (other than seats for aircraft or motor vehicles) (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

To be published 7/23/2020

4

6307.90.9889; 6307.90.9891

Shells for life jackets of manmade fibers (described in statistical reporting number 6307.90.9889)

Shells for life jackets of manmade fibers (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

To be published 7/23/2020

4

6307.90.9889; 6307.90.9891

Shells for pillows and comforters of microfiber fabric (described in statistical reporting number 6307.90.9889)

Shells for pillows and comforters of microfiber fabric (described in statistical reporting number 6307.90.9889 prior to July 1, 2020; described in statistical reporting number 6307.90.9891 effective July 1, 2020)

To be published 7/23/2020

3

7007.19.0000

Screen protectors of tempered safety glass, with adhesive on one side, in rectangular sheets having rounded corners, each measuring at least 55 mm by 120 mm but no more than 212 mm by 278 mm and at least 0.51 mm but no more than 0.55 mm in thickness (described in statistical reporting number 7007.19.0000)

Screen protectors of tempered safety glass transparent, cut, and treated, with adhesive on one side, in rectangular sheets, each weighing at least 6 g but not more than 77 g, each
measuring not less than 2.8 cm but not more than 28 cm in height, not less than 1.9 cm but not more than 21 cm in width, and not more than 0.1 cm in
thickness
(described in statistical reporting number 7007.19.0000)

(85 FR 42968 of 07/15/2020

3

7308.40.0000

Equipment for scaffolding, comprising galvanized steel frames, posts, planks, bay braces, ledgers, components and accessories, for assembly in cuplock configurations measuring at least 10 cm but not more than 3.3 m in height and at least 4 cm but not more than 8.8 m in width, weighing not more than 91 kg, with a load capacity not more than 2,750 kg (described in statistical reporting number 7308.40.0000)

Equipment for scaffolding, comprising galvanized steel frames, posts, planks, bay braces, ledgers, components and accessories, for assembly in ringlock or cuplock configurations measuring at least 10 cm but not more than 3.3 m in height and at least 4 cm but not more than 8.8 m in width, weighing not more than 91 kg, with a load capacity not more than 2,750 kg (described in statistical reporting number 7308.40.0000)

(85 FR 42968 of 07/15/2020

1

7318.15.8069

Bolts of alloy steel other than stainless steel, with shanks or threads with a diameter of 6 mm or more, valued not over $0.10 per kg (described in statistical reporting number 7318.15.8069)

Bolts of alloy steel other than stainless steel, with shanks or threads with a diameter of 6 mm or more, valued not over $0.05 per piece (described in statistical reporting number 7318.15.8069)

(85 FR 42968 of 07/15/2020

1

7318.15.8069

Perforated hollow hex head bolts (“banjo bolts”) of steel other than stainless, with shanks or threads with a diameter of 6 mm or more, valued not over $0.10 per kg (described in statistical reporting number 7318.15.8069)

Perforated hollow hex head bolts (“banjo bolts”) of steel other than stainless, with shanks or threads with a diameter of 6 mm or more, valued not over $0.07 per piece (described in statistical reporting number 7318.15.8069)

(85 FR 42968 of 07/15/2020

3

8414.59.6540

DC blowers for use in motor vehicle climate control systems, each measuring no less than 328 mm by 127 mm by 107 mm and no more than 352 mm by 209 mm by 162 mm (described in statistical reporting number 8414.59.6540)

DC blowers for use in motor vehicle climate control systems, each measuring no less than 323 mm by 122
mm by 102 mm and no more than 357 mm by 214 mm by 167 mm (described in statistical reporting number 8414.59.6540)

(85 FR 42968 of 07/15/2020

3

8414.59.6560

DC centrifugal radial blowers, each measuring not less than 350 mm by 127 mm by 107 mm and not more than 350 mm by 168 mm by 140 mm, of an output of 115 W to 280 W, and weighing at least 1.85 kg and no more than 2.08 kg (described in statistical reporting number 8414.59.6560)

DC centrifugal radial blowers, each measuring not less than 345 mm by 122 mm by 102 mm and not more than 355 mm by 173 mm by 145 mm, of an output of 100 W to 285 W, and weighing at least 1.80 kg but no more than 2.72 kg (described in statistical reporting number 8414.59.6560)

85 FR 42968 of 07/15/2020

3

8427.90.0090

Pallet jacks, not self-propelled, each measuring not more than 160 cm by 70 cm, with a load capacity of at least 1,950 kg but not more than 2,500 kg, with 89 mm pump and 11 gauge steel forks (described in statistical reporting number 8427.90.0090)

Pallet jacks, not self-propelled, each measuring not more than 160 cm by 70 cm, with a load capacity of at least 1,950 kg but not more than 2,500 kg, with a pump measuring between 89 mm and 105 mm and steel forks with a Gauge Range between 9–12’ (described in statistical reporting number 8427.90.0090)

85 FR 42968 of 07/15/2020

1

8501.52.4000

Multi-phase AC motors of an output of at least 5.8 kW but not exceeding 14.92 kW, each assembled with planetary gears and a gearbox (described in statistical reporting number 8501.52.4000) (U.S. Note 20(x)(97)

Multi-phase AC motors of an output of at least 5.8 kW but not exceeding 14.92 kW, each assembled with planetary gears and a gearbox (described in statistical reporting number 8501.52.4000)

85 FR 42970 of 07/15/2020

2

8501.52.4000

Multi-phase AC motors of an output of at least 5.8 kW but not exceeding 14.92 kW, each assembled with planetary gears and a gearbox (described in statistical reporting number 8501.52.4000) (U.S. Note 20(y)(113)

 

85 FR 43291 of 07/16/2020

3

8501.40.6040

Single-phase AC electric motors, other than gear motors, incorporating permanent split capacitors, each of an output range of 746 W or more but not exceeding 1.13 kW, operating at not less than 115 V of alternating current (VAC) but not more than 250 VAC, capable of operating while submerged in water, each weighing at least 9 kg but not more than 12.5 kg, measuring not more than 10 cm in diameter and at least 25 cm but not exceeding 36 cm in length (described in statistical reporting number 8501.40.6040)

Single-phase AC electric motors, other than gear motors, whether or not incorporating permanent split capacitors each of an output range of 746 W or more but not exceeding 1.13 kW, operating at not less than 115 V of alternating current (VAC) but not more than 250 VAC, capable of operating while submerged in water, each weighing at least 9 kg but not more than 12.5 kg, measuring not more than 10 cm in diameter and at least 25 cm but not exceeding 36 cm in length (described in statistical reporting number 8501.40.6040)

85 FR 42968 of 07/15/2020

3

8708.99.6890
8708.40.7570

Flange forgings of Society of Automotive Engineers (“SAE”) 1035 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number 8708.99.6890)

Flange forgings of Society of Automotive Engineers (“SAE”) 1035 carbon steel (described in statistical reporting
number 8708.40.7570)

85 FR 42968 of 07/15/2020

3

8708.99.6890
8708.40.7570

Hub forgings of Society of Automotive Engineers (“SAE”) 1035 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number 8708.99.6890)

Hub forgings of Society of Automotive Engineers (“SAE”) 1035 carbon steel (described in statistical reporting number 8708.40.7570)

85 FR 42968 of 07/15/2020

 

8708.99.6890
8708.40.7570

Park gear blanks of Society of Automotive Engineers (“SAE”) 1520 carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number 8708.99.6890)

Park gear blanks of Society of Automotive Engineers (“SAE”) 1520 carbon steel (described in statistical
reporting number 8708.40.7570)

85 FR 42968 of 07/15/2020

 

8708.99.6890
8708.40.7570

Stator shafts of Stahlwerk Annahutte ZF34C grade carbon steel suitable for use in automatic transmission systems for passenger motor vehicles (described in statistical reporting number 8708.99.6890)

Stator shafts of Stahlwerk Annahutte ZF34C grade carbon steel (described in statistical reporting number 8708.40.7570)

85 FR 42968 of 07/15/2020

3

9401.90.5081

Greaseless cylinders, each measuring at least 7.5 cm but not more than 25.4 cm in height and having a diameter of not more than 5.1 cm (described in statistical reporting number 9401.90.5081)

Greaseless cylinders, each measuring at least 7.5 cm but not more than 45 cm in
height
and having a diameter of not more than 5.1 cm (described in statistical reporting number 9401.90.5081)

85 FR 42968 of 07/15/2020

3

4823.90.8600 4823.90.8680

Drinking straws of paper, each measuring 12.5 cm or more but not more than 26.5 cm in length and 5 mm or more but not more than 10 mm in diameter (described in statistical reporting number 4823.90.8600)

Drinking straws of paper, each measuring 12.5 cm or more but not more than 26.5 cm in length and 5 mm or more but not more than 10 mm in diameter (described in statistical reporting number 4823.90.8600 prior to July 1,
2020;  described in statistical reporting
number 4823.90.8680 effective July 1,
2020
)

85 FR 42968 of 07/15/2020

3

7310.10.0010; 7310.10.0015

Square-shaped barrels of stainless steel, each with slatted sides and a maximum capacity of 228 liters (described in statistical reporting number 7310.10.0010)

Square-shaped barrels of stainless steel, each with slatted sides and a maximum capacity of 228 liters (described in statistical reporting number 7310.10.0010 prior to July 1, 2020; described in statistical reporting number 7310.10.0015 effective July 1, 2020)

85 FR 42968 of 07/15/2020

3

7310.10.0010; 7310.10.0015

Drums and barrels, of stainless steel, presented empty, each with a capacity of at least 50 liters but not more than 60 liters and weighing at least 12 kg but not more than 15 kg (described in statistical reporting number 7310.10.0010)

Drums and barrels, of stainless steel, presented empty, each with a capacity of at least 50 liters but not more than 60 liters and weighing at least 12 kg but not more than 15 kg (described in statistical reporting number 7310.10.0010 prior to July 1, 2020; described in statistical reporting number 7310.10.0015 effective July 1, 2020)

85 FR 42968 of 07/15/2020

2

9025.19.8040; 9025.19.8010; 9025.19.8020

Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040)

Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040 prior to July 1, 2020; described in statistical reporting number 9025.19.8010 or 9025.19.8020 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8040; 9025.19.8010; 9025.19.8020

Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040)

Digital clinical thermometers, valued not over $11 each (described in statistical reporting number 9025.19.8040 prior to July 1,
2020; described in statistical reporting number 9025.19.8010 or 9025.19.8020 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Cooking thermometers, including candy and deep-fry thermometers (described in statistical reporting number 9025.19.8080)

Cooking thermometers, including candy and deep-fry thermometers (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Infrared thermometers (described in statistical reporting number 9025.19.8080)

Infrared thermometers (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting
number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Thermometers comprising cable assemblies with sensors, suitable for use in swimming pools, not combined with other instruments, valued not over $10 each (described in statistical reporting number 9025.19.8080)

Thermometers comprising cable assemblies with sensors, suitable for use in swimming pools, not combined with other instruments, valued not over $10 each (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Galileo thermometers (described in statistical reporting number 9025.19.8080)

Galileo thermometers (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting
number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Handheld electronic thermometers, with a metal thermo-couple probe measuring 10 cm in length (described in statistical reporting number 9025.19.8080)

Handheld electronic thermometers, with a metal thermo-couple probe measuring 10 cm in length (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

2

9025.19.8080; 9025.19.8060; 9025.19.8085

Thermometers, not combined with other instruments, other than liquid-filled for direct reading, other than pyrometers, other than clinical thermometers (described in statistical reporting number 9025.19.8080)

Thermometers, not combined with other instruments, other than liquid-filled for direct reading, other than pyrometers, other than clinical thermometers (described in statistical reporting number 9025.19.8080 prior to July 1, 2020; described in statistical reporting number 9025.19.8060 or 9025.19.8085 effective July 1, 2020)

85 FR 43291 of 07/16/2020

Visit our website site for the UPDATED COMPREHENSIVE EXCLUSION LIST which includes all exclusions granted and technical amendments, corrections to typographic and/or ministerial errors to date.

If an exclusion was amended or corrected by a later Federal Register notice, the extension comments must be submitted referencing the original published notice.

If you have questions about filing an exclusion request, seeking a refund of past duties paid under Sec. 301, and/or discussing Sec. 301 duty avoidance strategies, such as use of country of origin transference or use of “First Sale” valuation, contact George R. Tuttle, III at geo@tuttlelaw.com or at 415-254-5986.

 

The information in this article is general in nature and is not intended to constitute legal advice or to create an attorney-client relationship with respect to any event or occurrence and may not be considered as such.

Copyright © 2020 by Tuttle Law Offices. 
All rights reserved. 

Information has been obtained from sources believed to be reliable.  However, because of the possibility of human or mechanical error by our offices or by others, we do not guarantee the accuracy, adequacy, or completeness of any information and are not responsible for any errors, omissions, or for the results obtained from the use of such information.

 

 

 

 

 

Subscribe Feedback Previous Newsletters